Cleaning Swanstone Sinks: An Easy DIY Guide!

Among all the popular manufacturers that are offering reliable sinks in the market, Swanstone is one of them. They have gained huge popularity in a relatively short amount of time. The reason behind that would be the extensive lineup of solid sinks that they have for every household and professional workspaces.

However, getting one solid and sturdy sink does not mean it will last for an extended amount of time without taking proper care of it.

And with our take on the ‘cleaning Swanston sinks: an easy DIY guide!’ we are going to provide you all the information that you need to know about taking care of your sink for enhancing the overall lifespan.

To keep things simple for you, we are going to divide our article into two different parts. One will be for the metal sinks, which will include the stainless steel and other metal ones that the manufacturer is offering. The other part will describe the cleaning process of non-metal sinks, such as the granite ones.

For the Metal Sinks

We are going to start with the metal ones as they are probably the ones that you have in your kitchen. The metal ones are exceptionally popular as they can blend well with other materials easily.

But they will not last for a long time if you can not keep them clean. Well, these are the steps that you need to follow to keep the surface of your sink clean and enhance the longevity:

Step 1: Obtain the Necessary Materials

To begin with, you will have to gather all the necessary equipment that you are going to require to clean the sink. Gather these and keep them within your reach before you start the cleaning process:

  • Cleaning soap solution
  • A rag
  • Bleach
  • Abrasive cleaner
  • Rust remover

For the cleaning soap solution, you can use a plain dishwasher if you do not have any special cleaner at your disposal. But we would suggest you to opt for the kitchen antimicrobial solutions that are out in the market nowadays.

For the abrasive cleaner, we would recommend you to get Ajax or Comet or anything similar. You will not require rust remover if the surface does not have any rust.

Step 2: Disinfect the Surface

If you have any special antimicrobial cleaner with you, we would recommend you to read the instructions and make a cleaning solution. However, if you are using a detergent, you should mix it with some warm water and create a strong cleaning solution.

After you have made a cleaning solution for disinfecting the surface, we would recommend you to use the rag and scrub the surface properly. Remember not to leave any space behind, or else you will not be able to disinfect it correctly.

After swabbing the surface, you should let the solution sit for a few minutes to let the cleaning solution do its trick. Then rinse the sink off with water.

Step 3: Remove Stains and Rust

If your sink is in perfect condition and does not have any type of stain or rust buildup on top of it, you can skip this step. For the food-based stains, you will have to make a 50/50 bleach solution with water. All you have to do is soak the stains with the solution and leave it for 15 minutes. After that, you will have to wipe it off.

For rust buildups and other kinds of mineral stains, you are going to have to use rust removers. The application process will depend on the brand of the remover that you got.

Follow the instructions that the manufacturer suggested and apply the remover properly. After that, leave it for the time that the manufacturer suggested and wipe it clean.

Step 4: Rinse

After wiping away the stains and rust buildups, you will have to do a final rinse. Rinse the surface thoroughly with water, and you will have a squeaky clean and shiny sink.

For the Granite Sinks

The cleaning process for the granite sink is a bit different. However, you will not have to worry about a thing because it is as simple as the metal sinks. These are the steps that you need to follow:

Step 1: Gather Necessary Materials

Before you start the cleaning process, you will have to gather some stuff. You will have to keep these materials around you;

  • Warm water
  • Soft cleaning cloth or sponge
  • Liquid cleaner
  • White vinegar
  • Granite cleaner

Granite surfaces are generally shiny and glossy. For that reason, you should be a little careful when you are choosing a cleaning cloth or a sponge for the cleaning process.

It would be best if you do not use metal scouring pads or any sponge that has metallic elements induced in them. They can leave scratches and blemishes on the beautiful granite surface of your sink.

Step 2: Make a Cleaning Solution

For making a cleaning solution, you would need warm water and liquid cleaner. You can also opt for detergents, but you should steer away from abrasive cleaners because they will damage the upper surface of your sink. For removing hard water, lime, and calcium deposits, you will have to mix vinegar with water at a 50/50 ratio.

Step 3: Cleaning the Surface

After you have made the cleaning solution, you will be set to make the surface of the sink look as good as new. Using a soft cloth or a sponge, wipe the entire surface by soaking it in the cleaning solution that you prepared.

Make multiple rounds over the entire area so that you can both disinfect and loosen up the tough stains. After that, let the solution sit for a while.

For cleaning the calcium, hard water, and lime deposits, you will have to use the vinegar solution that you prepared. Take a paper towel or soft cloth and soak it with the solution properly. Leave it on the deposit and let it sit for twenty minutes. After that, wipe the area clean.

Step 5: Final Rinse

Once you are done with cleaning the surface with the cleaning solution and removing the lime deposits, you will have to make a final rinse. Rinse the surface thoroughly and make sure you did not leave any space that might have the cleaning solution on top of it.

After you are done rinsing it, let it dry off before you start cleaning dishes on it.

Step 4: Use the Granite Cleaner (Optional)

To make the luster of the surface return and elongate the time in between the cleaning sessions, you can use a granite cleaner. You will have to dry off the surface before you apply a granite cleaner to it.

After that, take a soft cleaning cloth and soak it with the cleaner and polish the surface properly. You will have a shiny surface after this.

Final Words

With our take on the ‘cleaning Swanston sinks: an easy DIY guide!’, we hope that we were able to make the cleaning process much more manageable and straightforward for you.

We would like to conclude here by wishing you good luck and hoping that your sink looks squeaky clean and lasts for an extended amount of time.

1 thought on “Cleaning Swanstone Sinks: An Easy DIY Guide!”

  1. For many years I have been using comet to lean my swan stone sink with abs no problem. Over the past three years, however, I have not been able to get out stains. It is as though the finish is worn off and the stains get into the pores . I thought this wasn’t su to happen with solid surfaces.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top